Ella EW-SS-A-STD Guide d'installation télécharger pdf (Page 18)

www.ellasbubbles.com Page 18 08/14

www.bciacrylic.com

Step 5: Connect markings with a straight edge.

Step 6: Measure from the plumbing wall to back wall and record the measurements. (Image S) Transfer these measurements by making three width marks

on the panel, using the plumbing wall line as the starting point.

Step 7: Connect the lines with a straight edge. (Image T) This will be the back wall.

Plumbing Wall Side

When your project includes simulated tile walls, you will need to take some additional time to pre-plan before cutting to ensure your

grout lines will match up on all three panels. This can be done by taking accurate measurements of your soap dish wall and preliminary

measurements of your plumbing and back walls. You always want to be sure the full tile is at the top, and equal spacing of tiles are on the left

and right.

Step 1: Draw a level horizontal line across the soap dish wall, from plumbing wall to back wall. Measure from the horizontal line up to the ceiling in three

different locations to determine if the ceiling is level. Record the measurements on the existing wall. (Image U)

There are two measuring options: the template method and the level method. The following is the level method. Please refer to page 36

for template method.

Note:

If your ceiling is not level, cut the top edge of the wall panel according to the difference in your measurements.

Step 2: Measure from the top of the shower base or tub up to the horizontal line in three different locations. Add these measurements to the measure-

ments you took from the level line to the ceiling, and record them on the existing wall. (Image V)

Step 3: Draw a vertical plumb line from the top of the shower base or tub to the ceiling. Measure from the vertical line to the plumbing wall corner reinforce-

ments at 3 or 4 different locations to determine if the wall is plumb. Record the measurements on the existing wall. (Image W)

V W

INSTALLATION / WALL SURROUNDS

SOAP DISH WALL INSTALLATION CONTINUED

SOAP DISH WALL — LEVEL MEASURE OPTION

INSTALLATION / WALL SURROUNDS

Wall Surrounds

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 47 48

Commentaires sur ces manuels

Pas de commentaire

Ella EW-SS-A-STD Guide d'installation Page 18

Commentaires sur ces manuels